# REM by 5g CELL

**URL:** <https://vccsforum.nt.tuwien.ac.at/t/rem-by-5g-cell/503>\
**Category:** Vienna 5G System Level Simulator\
**Created:** [June 2, 2025, 10:10am UTC](https://vccsforum.nt.tuwien.ac.at/t/rem-by-5g-cell/503 "2025-06-02T10:10:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![daniel.lima](https://vccsforum.nt.tuwien.ac.at/letter_avatar_proxy/v4/letter/d/7ba0ec/32.png) [@daniel.lima](https://vccsforum.nt.tuwien.ac.at/u/daniel.lima)\
**Post date:** [June 2, 2025, 10:10am UTC](https://vccsforum.nt.tuwien.ac.at/t/rem-by-5g-cell/503/1 "2025-06-02T10:10:29Z")

</div>

Hello everyone.

I would like to create a simulation in which I have a 5G base station with 3 sectors. Each sector is given by an 8x8 antenna.

I would like to produce a REM (Radio environment map) per cell (sector). This map should indicate either the SINR or the average power. Therefore, since it is 1 base station with 3 sectors, there would be 3 REM maps.

I have been analyzing some base examples in the simulator folder, but they generate a single map with condensed data. I would like to obtain the REM maps separated by cell and visualize the small areas of overlap between the signals of different cells.

How can I produce this scenario? I am grateful in advance for the support.

---

<div class="post-metadata">

**Author:** ![daniel.lima](https://vccsforum.nt.tuwien.ac.at/letter_avatar_proxy/v4/letter/d/7ba0ec/32.png) [@daniel.lima](https://vccsforum.nt.tuwien.ac.at/u/daniel.lima)\
**Post date:** [June 4, 2025, 11:11am UTC](https://vccsforum.nt.tuwien.ac.at/t/rem-by-5g-cell/503/2 "2025-06-04T11:11:52Z")

</div>

Hello. I changed one of the base examples, returning the intermediate data that was generated and then I produced what I needed.

---

<div class="post-metadata">

**Author:** ![afastenb](https://vccsforum.nt.tuwien.ac.at/letter_avatar_proxy/v4/letter/a/6de8d8/32.png) [@afastenb](https://vccsforum.nt.tuwien.ac.at/u/afastenb)\
**Post date:** [June 11, 2025, 7:15am UTC](https://vccsforum.nt.tuwien.ac.at/t/rem-by-5g-cell/503/3 "2025-06-11T07:15:38Z")

</div>

Hello,

that is a good approach. In general, you can obtain the simulation results from the `results` object created in a simulation and create your own plots. For some results it is necessary to save additional results through the scenario settings.